Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 49 / 82

RM2000 Series Installation and Configuration Guide
RM2000 Series Configuration 41
Set Up Channel 5 for Accumulator Readings
Complete the following steps to set up channel 5 for accumulator readings. Refer
to the Glossary on page 59 for UCT field descriptions.
1 Click CH5 to display the channel configuration window (Figure 3-6).
Figure 3-6. Example of Channel 5 (CH5) Accumulator Settings
2 Click Digital Dry Contact if the unit will monitor open/closed states based
on a digital contact closure. Or, click Active Digital if the unit will monitor
open and closed states based on a voltage input.
3 If you want to include an optional Debounce filter in alarm settings, type
the number of seconds the input channel must remain in an alarm state
before the unit transmits an alarm packet. If you want alarm states
recognized immediately, enter zero (0) in the field.
4 Type the current accumulator value showing on the input device in the
Current Accumulator Value field.
5 If you want an alarm transmitted when the accumulated count reaches a
certain value, type the value in the
Accumulator Alarm Value field.
If you want the unit to transmit repeated alarms when the accumulator
alarm is triggered, type the number of minutes between repeated alarms in
the
Repeat alarm frequency field.