Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 14 / 82

RM2000 Series Installation and Configuration Guide
6 Getting Started
If you are working with a Bullhorn unit that does not include either of the options
described above,
do not ground at the Bullhorn unit. Common practice is to
ground the shield of the instrument cable at only one end. Ground the shield
drain wire to a suitable ground point at the source of the signal instead. This
method is intended to drain off electrically induced voltage levels from external
sources in an effort to ensure the most accurate and stable signal. The shield wire
should never be grounded on both ends. If the signal has unacceptable
fluctuation, the system ground should be repaired or improved.
Universal Configuration Toolkit Software
The Universal Configuration Toolkit (UCT) is a software program you use to set
and read the adjustable parameters of a Bullhorn unit that uses digital cellular or
satellite communications with your website account. After installing the unit, you
then configure it for service using the UCT software (also called configuration
software). The UCT software also provides diagnostic tools for checking unit
input channels, RSSI level, and transmitting a test packet to confirm
communications with the Bullhorn website.
N
OTE
:
You can also use the Bullhorn Information Line to verify data or test
packets have been received on your website account for a unit you specify. For
more information, see
Bullhorn Information Line
on page 10.
Microsoft .NET Framework
To run the UCT software, your computer must first be installed with Microsoft
®
.NET Framework version 1.1 or higher. Microsoft .NET Framework is a set of
software components that enable your computer to run any software program
that has been developed using Microsoft .NET technology. The installation
program for the UCT software and Microsoft .NET Framework are both included
in the installation kit (BATtools Suite Installer). When you install .NET
Framework or the UCT software on your computer, a setup program guides you
through the installation process as files copy to your computer’s hard drive. The
UCT software installation also creates a program icon on your computer desktop.
You can also start the UCT software using the Windows Start menu (
Start >
Programs > Configuration Toolkit ).
For more information about Microsoft .NET Framework, visit the Microsoft
website at the following web address:
http://www.microsoft.com