Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 11 / 82

RM2000 Series Installation and Configuration Guide
Getting Started 3

Do not disassemble or modify the battery. The battery contains safety and
protection devices, which, if damaged, may cause the battery to generate
heat, explode, or ignite.

Do not place the battery in or near fire, on stoves, or other high
temperature locations.

Do not place the battery in direct sunlight. Doing so may cause the battery
to generate heat, explode, or ignite. Using the battery in this manner may
also result in a loss of performance and a shortened life expectancy.
Bullhorn System Overview
Bullhorn is a wireless, telemetry system that provides scheduled and by-
exception inbound reporting for field equipment that is typically located in
remote areas. Based on the type of Bullhorn unit you are working with, data and
alarm packets transmit from remote field locations to your account on the secure,
Bullhorn Asset Tracker (BAT) website using digital cellular or satellite
communication networks. You can quickly determine the status of field
equipment anytime using information that is posted to your account on the BAT
website (
http://www.bullhornsys.com
).
The RM2020 Bullhorn units provide remote monitoring with full coverage using
LEOS satellite (ORBCOMM) communication networks.
RM2000 Series Overview
Each type of unit included in the RM2000 Series is a remote alarm point monitor
and pulse count accumulator. Unit types include the RM2020. The RM2000 Series
supports 6 input channels with the following specifications:

Input channels 1, 3, and 4 are isolated inputs that support analog ±5VDC, 4
to 20mA with external resistor, or active digital input devices.

Input channel 2 supports analog ±100VDC.

Input channel 5 and 6 are non-isolated inputs that support digital dry
contact closure or active digital input devices. Channel 5 can also be used
as a pulse count accumulator and Channel 6 as an accumulator reset. For
the RM2020, a second pulse count accumulator is supported on input
Channel 6.