Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 51 / 82

RM2000 Series Installation and Configuration Guide
RM2000 Series Configuration 43
Text boxes display green or red to indicate whether or not an entered value
is correct. If a text box is red, enter a different value and then validate
again. If all text boxes are green, settings are correct.
Set Up Channel 6 for Accumulator Readings
Complete the following steps to set up channel 6 for accumulator readings. Refer
to the Glossary on page 59 for UCT field descriptions.
1 Click CH6 to display the channel configuration window (Figure 3-7).
Figure 3-7. Example of Channel 6 (CH6) Accumulator Settings
2 Click Digital Dry Contact if the unit will monitor open/closed states based
on a digital contact closure. Or, click Active Digital if the unit will monitor
open and closed states based on a voltage input.
3 If you want to include an optional Debounce filter in alarm settings, type
the number of seconds the input channel must remain in an alarm state
before the unit transmits an alarm packet. If you want alarm states
recognized immediately, enter zero (0) in the field.
4 Type the current accumulator value showing on the input device in the
Current Accumulator Value field.