Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 31 / 82

RM2000 Series Installation and Configuration Guide
RM2020 Installation 23
Figure 2-6. Antenna/Surge Arrestor and Battery Connections
Installing the Solar Panel Battery Charger (1.65 Watt)
The procedure in this section explains how to install the 1.65 watt solar panel
battery charger. If you are working with the 5 watt solar panel battery charger
instead, install the equipment using the manual (part no. 122119) provided in the
installation kit.
N
OTE
:
If you plan to use the optional AC Battery Charger instead of the solar
panel battery charger, see Appendix C, Optional Equipment on page 57.
Complete the following steps:
1 Install the solar panel to a pole or flat surface using the attached bracket.
a If installing on a pole, install the u-bolt in the mounting holes on the
pipe bracket as shown in Figure 2-7.
Antenna/Surge
Arrestor
Connection
Solar Panel
Battery Charger
Connection