Bosch Rexroth IndraDrive Mi KCU02, Руководство по планированию проекта

Страница: 231 / 422

7 Notes on project planning
7.1 Combining the individual components
7.1.1 Power supply
The combination of the individual components mainly depends on the desired
power supply component:
●
HMV01, HMV02, HCS02 or HCS03
● HCS01
● KMV03
7.1.2 Sizing mains filters
KCU at HMV and HCS - number of axes, C
Y
capacitances
The KCU drive connection box transmits the DC bus voltage of
the supply unit to the KSM/KMS via the hybrid cable. KCU acts
like one more axis with higher C
Y
(capacitance against ground).
When selecting the supply unit or converter, observe the allowed
combinations of HNF/NFD mains filter and HNL mains choke.
Information on how to size the mains filter in mixed systems (IndraDrive Mi
(KCU, KSM, KMS) components toghether with IndraDrive M (HMS, HMD) or
IndraDrive C/Cs (HCS) components):
See
chapter 14.4 "Sizing mains filters (drive system)" on page 375 .
7.1.3 Power supply by HMV01, HMV02, HCS01, HCS02 or HCS03
Supply units
Both supply units (HMV01, HMV02) and converters (HCS01, HCS02,
HCS03) can be used as supply units for an IndraDrive Mi drive system.
The sum of the electric powers of all KCU at the DC bus of the supply unit
should not exceed P
DC_cont
and P
DC_max
of the supply unit (HMV or HCS).
P
DC_cont(KCU)
Continuous power KCU
P
DC_cont(HMV, HCS)
Continuous power of supply unit
Fig. 7-1: Continuous power of supply unit
P
DC_max(KCU)
KCU peak power
P
DC_max(HMV, HCS)
Peak power of supply unit
Fig. 7-2: Peak power of supply unit
Notes on project planning with
HCS02 as supply unit for KCU02
and KSM/KMS
The HCS02.1E-W0054 and -W0070 types are allowed as supply units for
KCU02 and KSM02/KMS02.
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
217/407
Notes on project planning
R911335703_Edition 04 Bosch Rexroth AG