BLEMO ER40-G, Руководство по программированию

Страница: 90 / 242

90
[1.5 INPUTS / OUTPUTS CFG] (I-O-)
Code Name/Description Adjustment range Factory setting
•
[ENCODER CONFIGURATION]
(continued)
EnU
• [Encoder usage]
[No] (nO)
nO
SEC
rEG
PGr
The parameter can be accessed if an encoder card has been inserted.
-
[No]
(nO) : Function inactive, In this case, the other parameters cannot be accessed.
-
[Fdbk monit.]
(SEC) : The encoder provides speed feedback for monitoring only.
-
[Spd fdk reg.]
(rEG) : The encoder provides speed feedback for regulation and monitoring.
If [Motor control type] (Ctt) = [SVC U] (UUC) the encoder operates in speed feedback mode and
enables static correction of the speed to be performed. This configuration is not accessible for
other
[Motor control type] (Ctt) values.
-
[Speed ref.]
(PGr) : The encoder provides a reference.
PGI • [Number of pulses]
100 to 5,000 1,024
Number of pulses per encoder revolution.
The parameter can be accessed if an encoder card has been inserted.
PGA • [Reference type]
[Encoder] (EnC)
EnC
PtG
The parameter can be accessed if [Encoder usage] (EnU) = [Speed ref.] (PGr) .
-
[Encoder]
(EnC) : Use of an encoder.
-
[Freq. gen.]
(PtG) : Use of a frequency generator (unsigned reference).
EIL
• [Freq. min. value]
- 300 to 300 kHz 0
The parameter can be accessed if [Encoder usage] (EnU) = [Speed ref.] (PGr) and if [Reference type]
(PGA) = [Freq. gen.] (PtG) .
Frequency corresponding to the minimum speed
EFr
• [Freq. max value]
0.00 to 300 kHz 300 kHz
The parameter can be accessed if [Encoder usage] (EnU) = [Speed ref.] (PGr) and if [Reference type]
(PGA) = [Freq. gen.] (PtG) .
Frequency corresponding to the maximum speed
EFI
• [Freq. signal filter]
0 to 1,000 ms 0
The parameter can be accessed if [Encoder usage] (EnU) = [Speed ref.] (PGr) .
Interference filtering.