BinTec X4000, Руководство пользователя

Страница: 90 / 498

90 X4000 User’s Guide
Configuration Requirements
4
Table 4-5: Setup Tool menus
PPP
Includes generally valid
➤➤
PPP settings, e.g. authentication protocol, that
do not just refer to particular WAN partners. With these settings, the router
can perform an authentication procedure for incoming calls, even if the
calling line number cannot be identified (e.g. because the call is made from
an analog line that does not transfer the calling line number).
ISDN Here you administrate X4000 ’s Credits Based Accounting System.
CAPI
Includes the settings for BinTec's
➤➤
CAPI user concept. You can use this
to assign user names and passwords to users of the X4000 's CAPI
applications. This makes sure that only authorized users can receive
incoming calls and make outgoing calls via CAPI.
C
ONFIGURATION
M
ANAGEMENT
Here you can administrate X4000 ’s configuration files. You can save them
either locally on X4000 or on your PC, for example.
M
ONITORING AND
D
EBUGGING
Includes submenus that enable you to locate problems in your network and
monitor activities, e.g. at
X4000 ’s WAN interface.
E
XIT
Quit the Setup Tool with Exit.
You can save the configuration file to the flash memory with Exit
➧
Save
as boot configuration and exit; this file is loaded after X4000 is restarted.
If you select Exit
➧
Exit without saving, all the settings made since X4000
was last started are lost.
Menu Function