BinTec X4000, Руководство пользователя

Страница: 132 / 498

132 X4000 User’s Guide
Basic Configuration of Basic Unit with Setup Tool
7
➤
Enter Number of Consecutive Addresses, e.g. 8 .
➤
Enter Lease Time (Minutes), e.g.
120
.
➤
Enter MAC Address, if applicable.
➤
Enter Gateway, if applicable.
➤
Select NetBT Node Type, e.g. not specified.
➤
Press SAVE.
You have returned to IP
➧
IP
ADDRESS POOL
LAN (DHCP), where the IP
address pools are listed. The entries are saved and you have defined an
address pool with 8 IP addresses: 192.168.1.1 to 192.168.1.8.
7.1.5 Setting Filters
NetBIOS filters If you are working with Windows in your local network, you should set
➤➤
NetBIOS filters to save costs. This prevents establishing connections
from the network to your Internet Service Provider (
➤➤
ISP ), e.g. in order to
forward WINS requests from PCs in your network. This means that X4000 asks
your ISP which
➤➤
host name can be assigned an IP address. These
connections are unnecessary because the ISP cannot resolve WINS names,
but still cost money.
A more detailed explanation of
➤➤
filters and security can be found in
chapter 10.2.8, page 335 .
To do To prevent these unnecessary connections, proceed as follows:
You can also create several entries to define an IP address pool of
unconnected address ranges, e.g. 192.168.1.20 - 192.168.1.29 and
192.168.1.35 - 192.168.1.40, and so on.
When configuring filters, make sure not to lock yourself out.
➤
Use the serial interface or ISDN login on X4000 for filter configuration.
➤
If you still access X4000 over your LAN (e.g. telnet), before starting filter
configuration select in the menu
IP
➧
A
CCESS
L
ISTS
➧
I
NTERFACES
➧
EDIT : First rule = none.