BinTec X4000, Руководство пользователя

Страница: 163 / 498

X4000 User’s Guide 163
Configuring WAN Partners
7
Table 7-13: WAN P
ARTNER
➧
ADD
Compression Defines the type of compression that should be
used for data traffic to the WAN partner.
Possible values:
■
STAC: only if Encapsulation = PPP
■
MS-STAC: only if Encapsulation = PPP
■
none
Encryption Defines the type of encryption that should be
used for data traffic to the WAN partner. Only
possible if STAC compression is not activated
for the connection. Possible values:
■
MPPE 40: MPPE version 1 with 40-bit key
■
MPPE 56: MPPE version 1 with 56-bit key
■
MPPE V2 40: MPPE version 2 with 40-bit
key
■
MPPE V2 56: MPPE version 2 with 56-bit
key
■
DES 56: DES with 56-bit key
■
Blowfish 56: Blowfish with 56-bit key
■
none: No encryption
These values are only available if PPP, Async
PPP over X.75, Async PPP over X.75/T.70/
BTX or X.25_PPP has been selected under
Encapsulation.
Calling Line
Identification Indicates whether calls from this WAN partner
should be identified by means of the calling
party number (
➤➤
CLID ). The value of this
field is dependent on Direction in the submenu
WAN N
UMBERS
and cannot be set here.
Field Meaning