BinTec X4000, Руководство пользователя

Страница: 148 / 498

148 X4000 User’s Guide
Basic Configuration of Basic Unit with Setup Tool
7
To do Make the following entries:
➤
Select the Item, e.g. PPP (routing) .
➤
Enter the Number, e.g. 10 .
➤
Select the Mode, e.g. right to left .
➤
Select the Bearer, e.g.
data
.
➤
Press SAVE.
You have returned to the menu CM-1BRI, ISDN S0
➧
I
NCOMING
C
ALL
A
NSWERING
. The entries are saved and displayed in the list.
You have thus assigned a service ( PPP (routing) ) to one of your phone
numbers (
10
). This means that when a data call is received by Called Party
Number 10, it is put through to the service PPP (routing).
➤
Repeat these steps until you have assigned to all phone numbers the
services to be reached under these numbers.
This concludes the configuration of Incoming Call Answering. X4000 now
distributes the incoming calls to the internal services.
Advanced
configuration
CM-1BRI, ISDN S0
➧
A
DVANCED
S
ETTINGS
contains settings for X.31 TEI (see
chapter 8.1.4, page 197 ).
If you use a leased line, you can implement a backup solution using the
Bandwidth on Demand feature (see chapter 8.2.3, page 201 ). If you use this
facility, a dialup connection is set up to the connection partner if the leased line
fails.
7.2.2 Configuring Serial Interfaces
The X4000 basic unit is equipped with two serial WAN interfaces:
■
The first serial port (Setup Tool menu
CM-SERIAL, S
ERIAL
➧
U
NIT
0
) can be
used as interface type
– X.21/V.11
– V.35/V.11
– V.36/V.11