BinTec X4000, Руководство пользователя

Страница: 126 / 498

126 X4000 User’s Guide
Basic Configuration of Basic Unit with Setup Tool
7
The menu S
YSTEM
➧
T
IME AND
D
ATE
contains the settings for manually
entering the time and date in X4000 (see chapter 8.3.1, page 242 ).
7.1.3 Configuring the LAN Interface
➤➤
IP address ,
➤➤
netmask ,
➤➤
Encapsulation
Now configure the LAN interface (10/100 Base-T Ethernet) of X4000 . The LAN
interface is the physical interface to the local network. In the following menu,
enter the address where your router can be reached in the LAN. As long as your
router does not have this entry, it cannot be recognized by other hosts in the
network.
If your X4000 is connected to a LAN that consists of two subnets, you should
enter a Second Local IP Number and a Second Local Netmask for it for the
second subnet. This is explained in the following example:
Figure 7-2: X4000 with two different local IP addresses
The first subnet has two hosts with the IP addresses 192.168.42.1 and
192.168.42.2 and the second subnet has two hosts with the IP addresses
192.168.46.1 and 192.168.46.2. To be able to exchange data packets with the
first subnet, X4000 uses the IP address 192.168.42.3, for example, and
192.168.46.3 for the second subnet. The netmasks for both subnets must also
be indicated.
Local IP-Number
192.168.42.3
Bin Tec
4000
192.168.42.1 192.168.42.2 192.168.46.1 192.168.46.2
Second Local IP-Number
192.168.46.3
X4000