BinTec X4000 Скачать руководство пользователя страница 215

Страница: 215 / 498

X4000

User’s Guide

215

Settings Specific to WAN Partners

➤

Leave

WAN P

ARTNER

➧

ADD

➧

WAN N

UMBERS

➧

ADD

with Exit.

For dynamic assignment of the IP address by the Internet Service Provider,

proceed as follows:

➤

Go to

WAN P

ARTNER

➧

ADD

➧

IP.

➤

Select IP Transit Network:

dynamic client.

➤

Press SAVE.

➤

Press SAVE.

➤

Leave

WAN P

ARTNER

with Exit.

You have returned to the main menu.

BOD for IP-Based Applications (Optional)

Filters and rules

BOD for IP-based applications is configured by filters and rules in a similar way

to Access Lists for IP packets (see

chapter 10.2.8, page 335

). First filters are

defined that determine which IP packets (and thus applications) are to influence

the available bandwidth. If several filters are defined, they can be interlinked

using a rule chain.

Proceed as follows to define suitable filters:

➤

Go to

➧

ANDWIDTH

EMAND

(BOD)

➧

ILTER

➧

➤

Enter Description, e.g.

mail_smtp_out.

➤

Select Protocol, e.g.

tcp.

➤

Enter Destination Address, e.g.

172.16.08.15.

➤

Enter Destination Mask, e.g.

255.255.255.255.

➤

Select Destination Port: e.g.

specify.

➤

Enter Specify Port, e.g.

25 (port for SMTP).

➤

Press SAVE.
A list of all the previously defined filters appears.

➤

Leave

➧

ANDWIDTH

EMAND

(BOD)

➧

ILTER

with Exit.

A rule for BOD is defined in a similar way to a rule for IP packets (see

chapter 10.2.8, page 335

). Different rules normally consist of different filters

Содержание X4000


















































































































































































































































































































































































































































































































Результаты поиска

Содержание X4000

Отзывы:

Похожие инструкции для X4000

Бренды по названию

Популярные бренды

BinTec X4000, Руководство пользователя

Результаты поиска

Содержание X4000

Отзывы:

Похожие инструкции для X4000

Бренды по названию

Популярные бренды