BinTec X4000, Руководство пользователя

Страница: 384 / 498

384 X4000 User’s Guide
Troubleshooting
12
then back to dialup, in order to delete the routes and services learned by
the WAN partner.
I can’t change to a network drive on the client station.
➤
The file server may be "invisible" to the client. Proceed as described under
"A Server exists in a remote LAN ...".
➤
Check if all the licenses available on the server are in use.
ISDN connections are constantly reconnected.
It is not only RIP/SAP packets that cause ISDN connections to be set up.
➤
Check if there is an entry in the MIB table ipxDenyTable that is preventing
Novell serialization packets from being sent over the dialup connection.
➤
Check under IPX if you have activated enable IPX spoofing and enable
SPX spoofing with yes.
➤
Check if any RCONSOLE is running with a constantly changing screen
(e.g. MONITOR, IPXCON, TCPCON, screensaver, etc.).
➤
Check if NetBIOS over IPX is used in the LAN (Windows for Workgroups,
NT, Win 95). If necessary, select
no or on LAN only under IPX for NetBIOS
Broadcast replication.
➤
Check if NDS Replica Synchronization is active (for Netware 4.1 servers
and higher).
➤
Evaluate the syslog messages (Level = debug) and, if applicable, filter out
the IPX packets indicated in the messages as causing unwanted
connections to be set up.
The MIB variable ipxAdmSpxConns shows more connections
than are actually active.
X4000 may not be receiving SPX disconnect messages from the server.
➤
Enter the command
reset router
on the console of the respective
server.
All inactive connections between the server and X4000 are cleared.