BinTec X4000, Руководство пользователя

Страница: 71 / 498

X4000 User’s Guide 71
Connection Methods
4
4.1.1 Man-Machine Interface (MMI)
Initial steps The MMI with its display and input keys is a good method for establishing “initial
contact” with X4000 . You should carry out the following initial steps with the
MMI:
➤
set the desired display language
➤
enter the IP address and netmask
You can then carry out further configuration steps using the Configuration
Wizard or Setup Tool.
4.1.2 Connecting Over the Serial Interface
Initial configuration Connecting over the serial interface is very suitable if you carry out an initial
configuration on X4000 before you have entered an IP address and netmask.
To connect X4000 to your computer over the serial interface, connect the serial
interface on the basic unit of X4000 to the serial interface of your computer.
Windows If you are using a Windows PC, you will need a terminal program, e.g.
HyperTerminal, for the serial connection. How to install this assistant and
BRICKware for Windows is described in chapter 6.2, page 112 ).
To do
➤
Click the Windows Start button and then Programs
➧
BRICKware
➧
BRICK at COM1 (or BRICK at COM2 if you use the COM2 port of your
PC) to start HyperTerminal.
➤
Press Return (at least once) after the HyperTerminal window opens.
A window with the login prompt appears. You are now in the SNMP shell of
X4000.
➤
Continue with chapter 4.2, page 76 .