BinTec X4000, Руководство пользователя

Страница: 412 / 498

412 X4000 User’s Guide
Important Commands
14
14.1 SNMP Shell Commands
X4000 contains several pre-installed programs that can be started directly from
the SNMP shell. A short description of the most commonly used programs and
the associated command lines for starting the respective programs in the SNMP
shell are given below.
telnet
telnet [-f] <host> [<port>]
Is used to communicate with another host.
–
-f:
specifies that the telnet session should be transparent. This option
is especially useful for establishing connections to non-telnet ports
(e.g. uucp or smtp).
–
host
: IP address or name of host.
–
port
: port number.
ping
ping [-i] [-f <precount>] [-d <msec>] [-c <count>] <target>
[<size>]
Is used to test communication to another host.
–
-i:
sends each packet one byte larger.
–
-f <precount>:
<precount> packets are sent first. The next packet
is sent as soon as a packet has been received.
Output: a dot appears on the screen for each packet sent and a dot is
Entering
?
displays a list of the most important commands available on X4000 .
Please note:
Parameters shown in the command lines inside square brackets [ ] represent
optional values. Terms inside angle brackets < > can have several values.
Do not enter any brackets!