BinTec X4000, Руководство пользователя

Страница: 167 / 498

X4000 User’s Guide 167
Configuring WAN Partners
7
To do Make the following entries:
➤
Enter the Number, e.g. 0911987654321.
➤
Select the Direction, e.g. outgoing.
➤
Press SAVE.
The entries are saved and listed.
➤
Leave WAN P
ARTNER
➧
ADD
➧
WAN N
UMBERS
with EXIT.
➤➤
PPP
authentication
Now enter the
➤➤
PPP settings of your WAN partner. These are used to
authenticate your connection partner.
When a call is received, the Calling Party Number is always sent over the ISDN
➤➤
D-channel . This number enables X4000 to identify the caller
(
➤➤
CLID ), provided the caller is entered as a WAN partner. After
identification with CLID, the router can additionally carry out PPP authentication
with the WAN partner before it accepts the call. The router needs the necessary
data for this, which you should enter here. First establish the type of
authentication process that should be performed, then enter a common
password and two user names. You get this information, for example, from your
Internet Service Provider (ISP) or the system administrator at your head office.
The call is only accepted if the data entered in X4000 matches the caller’s data.
If you authenticate WAN partners over a RADISU server, please see the
relevant instructions in the Extended Features Reference .
To set the PPP authentication for the WAN partner, proceed as follows:
➤
Go to WAN
PARTNER
➧
ADD
➧
PPP:
If the calling party number of an incoming call matches both a WAN partner’s
Number with wildcards and a WAN partner’s Number without wildcards, the
entry without wildcards is always used.