BinTec X4000, Руководство пользователя

Страница: 288 / 498

288 X4000 User’s Guide
Configuration of Expansion and Resource Cards with the Setup Tool
9
To do Proceed as follows to configure the LAN interface(s) of the expansion card:
➤
Go to X4E-100BT, F
AST
E
THERNET
➧
U
NIT
0 for the first interface.
This menu offers the same options as
CM-1
OO
BT, F
AST
E
THERNET
for the
LAN interface of the basic unit. For a detailed description, see
chapter 7.2.1, page 137 .
➤
Enter Local IP Number, e.g. 192.168.1.250.
➤
Enter Local Netmask, e.g. 255.255.255.0.
➤
If applicable, enter Second Local IP Number and Second Local
Netmask.
➤
Select Encapsulation, e.g. Ethernet II.
➤
Select Mode, e.g. auto.
➤
Press SAVE.
You have returned to the main menu and the entries have been saved.
Advanced
configuration
If you wish to use the IPX
➤➤
protocol , you will find an explanation of how to
configure the LAN interface for IPX in chapter 8.4, page 268 .
Information about bridging can be found in the Software Reference .
9.3.2 Broadband Internet Access (ADSL) with X4000
and LAN Expansion Card
BinTec Communications AG’s X4000 offers the PPP-over-Ethernet protocol.
This protocol is required, for example, for connecting terminals to the Internet
over the T-DSL connection of Deutsche Telekom AG to achieve increased
bandwidth.
chapter 7.2.3, page 155 describes how you can use the T-DSL connection with
X4000 ’s basic unit with only one LAN interface. The limitations and security
risks described there do not apply if X4000 is equipped with a LAN expansion
If you use the ADSL connection of another provider, ask the provider about any
special features of your ADSL connection that need to be taken into account.