BinTec X4000, Руководство пользователя

Страница: 147 / 498

X4000 User’s Guide 147
Configuring WAN Interfaces
7
Table 7-9: Item
X.25 PAD
Enables data connections with X.25 PAD.
Possible values Meaning
Make sure you enter the right number under Number, i.e. the number that
actually arrives at X4000 ! For example, if X4000 is connected to a
➤➤
PABX ,
only the PABX extension number arrives at X4000 .
If you are not sure which number arrives at X4000 , proceed as follows:
➤
Call X4000 with a conventional telephone using one of its extension
numbers.
➤
Go to M
ONITORING AND
D
EBUGGING
➧
ISDN M
ONITOR
.
You can now see the incoming call in the menu.
➤
Place the cursor on the call and enter
d
(for details).
Under Local Number, you can see the part of the number that arrives at
X4000 .
➤
Type in this part of the number in CM-1BRI, ISDN S0
➧
I
NCOMING
C
ALL
A
NSWERING
➧
ADD
under Number.
If you use a communication application on your PC that is based on Remote
CAPI 1.1 (current version: Remote CAPI 2.0),
X4000 must translate the
➤➤
MSN s (= Number, multidigit) of the incoming call to
➤➤
EAZ s (single
digit) (CAPI 1.1 can only detect single-digit numbers). This is why the CAPI
entry under Item is not simply called
"CAPI" but "CAPI 1.1 EAZ x Mapping".
When using CAPI 1.1, you must therefore make sure you assign each CAPI
application the corresponding EAZ(s) by "mapping". For example select for
Number =
1234 the entry Item = CAPI 1.1 EAZ 0 Mapping and for Number =
5678 the entry Item = CAPI 1.1 EAZ 1 Mapping.
CAPI 2.0 evaluates the MSN directly and "translation" to EAZ is not necessary.
You can use the same CAPI 1.1 EAZ x Mapping entry for each Number i.e. a
single entry is sufficient.
You should certainly try to change your PC system to CAPI 2.0 so that you can
also use new features.