BinTec X4000, Руководство пользователя

Страница: 229 / 498

X4000 User’s Guide 229
Settings Specific to WAN Partners
8
Proceed as follows if you want X4000 to report the name server addresses
entered to the WAN partner (Server Mode) or if other name server addresses
other than those in the LAN are to be used for connections to the WAN partner
(Client Mode, e.g. for dialing in to an Internet Service Provider):
➤
Go to
WAN P
ARTNER
➧
E
DIT
➧
IP
➧
A
DVANCED
S
ETTINGS
.
➤
Select Dynamic Name Server Negotiation.
➤
Confirm with OK.
➤
Press SAVE.
8.2.8 Routing Information Protocol (RIP)
Routing Routing can be described as follows: The
➤➤
router receives
➤➤
data
packets , each of which contains data about the destination host. On the basis
of the entries in the so-called Routing Table (see "Creating a Routing Entry",
page 175 ), the router decides which route to use to forward the data packet to
ensure that it arrives at its destination as quickly and cheaply as possible (with
the fewest possible intermediate stations). The entries in the routing table can
be defined statically or the routing table can be updated constantly by a dynamic
exchange of routing information between several routers. This exchange is
If you do not have a Secondary DNS or WINS server, you can enter the IP
address of the Primary DNS or WINS server in the Secondary Domain Name
Server or Secondary WINS field again.
This may be necessary for connection to some data communications clients.
If you do not have a Domain Name Server in your LAN (smaller networks often
have no DNS of their own), the name resolution can be carried out, for
example, via your Internet Service Provider (Client Mode). However, this
requires ISDN connections, which involve charges.
If you work with Windows, you can also obtain name resolution without asking
for a DNS. To do this, you must adapt the LMHOSTS file on all PCs in the LAN.