BinTec X4000, Руководство пользователя

Страница: 74 / 498

74 X4000 User’s Guide
Configuration Requirements
4
➤
Click OK.
A window with the login prompt appears. You are now in the SNMP shell of
X4000 . Continue with chapter 4.2, page 76 .
Unix
➤
Type
telnet <IP address of
X4000
>
into a terminal.
A window with the login prompt appears. You are now in the SNMP shell of
X4000 . Continue with chapter 4.2, page 76 .
4.1.4 Connection Over ISDN
Remote configuration Connection over
➤➤
ISDN with
➤➤
ISDN login is especially recommended
if X4000 is to be configured or administrated remotely (remote LAN in Figure 4-
2, page 74 ). This is also possible even if X4000 has not been initially configured,
i.e. is still in the ex works state. Connection is then obtained by means of a
BinTec router that is already configured or an ISDN card in the remote LAN,
using a number of X4000 ’s ISDN connection in your own LAN (e.g. 1234).
It is thus possible for the administrator at a remote LAN to configure X4000 in a
home office which is hundreds of kilometers away. The X4000 in the home
office (e.g. your LAN) merely has to be connected to an ISDN line and turned
on.
Figure 4-2: Connection over ISDN login for remote maintenance
B
IA
N C
A
/B
R
IC
K -X
M
ISDN
Bin Tec
4000
isdnlogin 1234
Remote-LAN
Your LAN
X4000
unconfigured
( 1234
Router in the
Remote-LAN