BeneVision TMS60, Руководство оператора

Страница: 143 / 250

Monitoring with the TMS60 at the CMS Monitoring at the CMS (Version Earlier than 03.00)
TMS60 Operator’s Manual 12 - 25
12.2.5.3 Arrhythmia Settings
The following table lists the arrhythmia settings in the Arrhythmia Analysis section of
the ECG tab.
12.2.5.4 Relearning
A relearn can be done for arrhythmia, ST analysis, or for both simultaneously.
The TD60 initiates the learning process for ST or Arrhythmia analysis after any of the fol-
lowing:
■
TD60 power-up
■
Return to normal monitoring from the Standby mode
■ Enabling ST or Arrhythmia analysis
■
The lead has been changed in ECG 1 waveform (3 lead only)
■
Patient size changes
■
Selecting the Relearn button in the Arrhythmia Analysis section
Selecting the the Relearn button in the Arrhythmia Analysis section is recommended
after one or more of the following:
■
ECG electrodes have been repositioned
■ Eight hours have passed since the last relearn
■
Significant changes occurred to the patient QRS complex
■
Significant changes occurred to the patient ECG rhythm
Options or Buttons Description Settings*
Arrhythmia Alarms Configures the arrhythmia alarm settings. See "Factory Default Arrhythmia
Alarm Settings" on page 12 - 6 for
details.
Relearn
Enables an
arrhythmia relearning. See "Relearning" on page 12 - 25
for details.
QRS Threshold Settings Configures the QRS threshold. See "Configuring the QRS Thresh-
old" on page 12 - 26 for details.
NOTE
•
ST Analysis must be turned on before it will relearn.