BeneVision TMS60, Руководство оператора

Страница: 66 / 250

Introduction Monitoring ECG
7 - 2 TMS60 Operator’s Manual
7.1 Introduction
The electrocardiogram (ECG) measures the electrical activity of the heart and displays it
on the TD60 as waveforms and numerics.
The TD60 can obtain an ECG value by using a 3/5 lead ECG leadwires in conjunction with
the matching skin electrodes.
For details about configurations of the ECG parameters, QT analysis, ST analysis, and
Arrhythmia analysis at the CMS, refer to
Chapter 12 Monitoring with the TMS60 at the
CMS .
7.2 Safety
WARNING
•
This equipment is not suitable for direct cardiac application.
•
Use manufacturer specified electrodes and lead wires.
•
Make sure the conductive parts of electrodes and associated connectors
for applied parts, including the neutral electrode, do not contact any
other conductive parts including earth.
•
Periodically inspect the electrode application site to ensure skin quality.
If the skin quality changes, replace the electrodes or change the applica-
tion site.
•
Do not touch the patient or any device connected to the patient, includ-
ing the bed and gurney, during defibrillation. Otherwise serious injury
or death could result.
•
False low heart rate indicators or false Asystole calls may result with cer-
tain pacemakers because of pacemaker artifact such as electrical over-
shoot of the pacemaker overlapping the true QRS complexes.
CAUTION
•
Interference from a non-grounded instrument near the patient and elec-
tro-surgery interference can cause problems with the waveform.