BeneVision TMS60, Руководство оператора

Страница: 237 / 250

EMC
TMS60 Operator’s Manual B - 3
If the system is operated within the electromagnetic environment listed in Table Guid-
ance and declaration - electromagnetic immunity, the system will remain safe and pro-
vide the following essential performance:
■
Operating mode
■ Accuracy
■
Function
■
Accessories identification
■
Data stored
RF emissions
CISPR 11
Class A The system is suitable for use in all establishments other
than domestic and those directly connected to the public
low-voltage power supply network that supplies build-
ings used for domestic purposes.
Harmonic
Emissions IEC61000-3-2
Class A
Voltage Fluctuations/Flicker
Emissions IEC 61000-3-3 Complies
Note: The TD60 Transmitter and BP10 (subpart) are classified by is their using environment or intended func-
tion.
NOTE
•
The device needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information pro-
vided below.
•
Other devices may affect this device even though they meet the require-
ments of CISPR.
•
When the inputted signal is below the minimum amplitude provided in
technical specifications, erroneous measurements could result.
•
The EMISSIONS characteristics of this device make it suitable for use in
industrial areas and hospitals (CISPR 11 class A). If it is used in a residen-
tial environment (for which CISPR 11 class B is normally required) this
device might not offer adequate protection to radio-frequency commu-
nication services. The user might need to take mitigation measures,
such as relocating or re-orienting the device.
•
If the essential performance is lost or degraded, it may be necessary to
take mitigation measures, such as re-orienting or relocating the ME
EQUIPMENT or ME SYSTEM or shielding the location or stopping using
the monitor and contact the service personnel.