BeneVision TMS60, Руководство оператора

Страница: 159 / 250

Monitoring with the TMS60 at the CMS Monitoring at the CMS (Version 03.00 or Above)
TMS60 Operator’s Manual 12 - 41
Using the buttons described in the following table as desired.
12.3.3.5 QT Display
When QT Analysis is enabled, the QT digital area displays:
1. Parameter label
2. QTc value
3.
∆
QTc value
4. QT value
5. QTc alarm limit (if QTc alarm is off, the alarm off symbol is displayed)
Buttons Description Settings*
Left or right arrow Select the desired lead to display on the
QT View menu screen by selecting the
left or right arrow.
II , I, III, aVR, aVL, aVF, V
Set Baseline Set an ST baseline when ST values become
stable. None
The QT template updated time displays at the bottom of the screen.
Hide Baseline Hides the reference baseline. None
* The factory default settings are in bold.
1
2
3
5
4
NOTE
•
The display of the QT numeric area differs as related settings change.