BeneVision TMS60, Руководство оператора

Страница: 105 / 250

Monitoring Noninvasive Blood Pressure (NIBP) (Optional) Screen Display after Pairing a TD60 with a BP10
TMS60 Operator’s Manual 10 - 5
10.3.2 Unpairing via BP10
1. Press the MPAN key on the BP10.
2. Select Yes when the prompt message “Are you sure you want to close MPAN and
unpair BP10?” appears.
10.3.3 System Responses after Successfully Unpairing
When the TD60 is unpaired with the BP10 successfully
:
■
The status of the BP10 connected previously will be changed to Disconnect under
Devices on the TD60.
■
The icon will be changed to in the top-right corner of the TD60’s screen
and of the BP10.
■
Measured NIBP values on the main screen of the TD60 is displayed as “---”
indicating invalid values.
10.4 Screen Display after Pairing a TD60 with a BP10
When a TD60 is paired with a BP10 successfully, measured NIBP values will be displayed
on the main screen of the TD60 as shown in the following figure.
CAUTION
•
Before moving a TD60 or BP10 to another area, unpair them first.
•
Before admitting a new patient at a BP10, you need to unpair it with a
TD60 first.
1
2
3
4