BeneVision TMS60, Руководство оператора

Страница: 146 / 250

Monitoring at the CMS (Version Earlier than 03.00) Monitoring with the TMS60 at the CMS
12 - 28 TMS60 Operator’s Manual
12.2.8 SpO
2
Settings
The following table lists the SpO
2
settings in the SpO
2
tab.
Options Description Settings*
Activation State Configures whether or not to enable the
SpO
2
alarm.
On
, Off
Alarm Priority Configures the SpO
2
alarm levels. High, Med
Record on Alarm Selects whether or not to activate the
recorder when an SpO
2
alarm is triggered.
On, Off
Sweep Speed Configures the SpO
2
waveform sweep
speed.
6.25 mm/s, 12.5 mm/s, 25.0 mm/
s , 50.0 mm/s
SpO
2
Desat Limit Activa-
tion State
Configures whether or not to enable the
SpO
2
Desat alarm.
On , Off
Sensitivity
(Masimo only)
The option is not configurable. The option setting is synchronous with the set-
ting at the TD60. See
" Configuring the SpO2 Setup" on page 9 - 5.
SpO
2
High Limit (%) Configures the SpO
2
high alarm limit. (Low limit + 1) to 100
The default is 100 .
SpO
2
Low Limit (%) Configures the SpO
2
low alarm limit. 0 to (high limit - 1)
The default is 90 .
PR High Limit (bpm) Configures the PR high alarm limit. (Low limit + 2) to 300
The default for adult is 120 .
The default for pediatric is 160 .
PR Low Limit (bpm) Configures the PR low alarm limit. 18 to (high limit - 2)
The default for adult is 50 .
The default for pediatric is 75 .
SpO
2
Desat Limit (%) Configures the SpO
2
Desat low limit. 0 to 100
The default is 80 .
Averaging
(Masimo only)
The option is not configurable. The option setting is synchronous with the set-
ting at the TD60. See
" Configuring the SpO2 Setup" on page 9 - 5 for details.
* The factory default settings are in bold.