BeneVision TMS60, Руководство оператора

Страница: 104 / 250

Unpairing the TD60 with the BP10 Monitoring Noninvasive Blood Pressure (NIBP) (Optional)
10 - 4 TMS60 Operator’s Manual
◆
If neither [ Yes ] nor [ No ] is selected, the wireless setup confirmation message
will disappear in three minutes. Besides, the “Pairing failure” message will be
displayed in the prompt message area of the TD60. The “MPAN
Disconnected” message is displayed in the message area of the BP10. In this
case, follow steps in
10.2 Pairing the TD60 with the BP10 on page 10 - 2 to
pair the TD60 with the BP10 again.
■
When NIBP measurement mode is set to Manual , Auto , or Sequence and the
BP10 is paired successfully with the TD60, the wireless setup confirmation
message “Select Yes to continue Patient in BP10. Select No to continue Patient in
Telemetry.” will not be displayed. Patient-related settings from the TD60 will be
transferred to the BP10. But NIBP-related settings displayed on the main screen of
the TD60 will come from the BP10. The patient monitored by BP10 will be dis-
charged automatically and the data history related to this patient will be cleared.
■
Patient Category can be changed at the TD60 only.
A patient cannot be discharged from the BP10 and NIBP-related settings are grayed out
at BP10. To discharge a patient from BP10, you need to unpair the BP10 form the TD60,
refer to
10.3 Unpairing the TD60 with the BP10 on page 10 - 4 .
10.3 Unpairing the TD60 with the BP10
You can unpair the TD60 with the BP10 either via the TD60 or via the BP10.
10.3.1 Unpairing via the TD60
You can choose either of the two methods to unpair the TD60 with the BP10 via the
TD60.
Option 1:
1. Press to enter the main menu of the TD60.
2. Tap Wireless Modules .
3. Select the device you wish to disconnect from the TD60 from the devices list under
Devices and tap Disconnect . The connected device is disconnected from the
TD60.
Option 2:
1. Press the key to enter the main menu of the TD60.
2. Tap Wireless Modules .
3. Disable MPAN .