BeneVision TMS60, Руководство оператора

Страница: 110 / 250

Introduction Configuring the TD60
11 - 2 TMS60 Operator’s Manual
11.1 Introduction
The Maintenance menu at the TD60 provides access to the system settings such as loca-
tion, device name, alarm settings, quick keys, screen lock, and password updates. Enter-
ing this menu
requires a passcode.
11.2 Entering the Maintenance menu
1. In the main menu, tap Maintenance .
2. Input the maintenance passcode.
3. Tap Accept to enter the Maintenance menu.
11.3 Configuring the General Menu
Select General to configure the display auto off, language, location, notch filter, ECG
lead labeling, SpO
2
module, SpO
2
tone, and enable or disable ECG calibration.
1. In the Maintenance menu, tap General .
The current setting displays to the right of the option.
2. Select the options described in the following table.
Options Description Settings*
Display Auto Off Configures the time for display auto off. 1 min , 2 min, 5 min, 15 min 30
min, Off
Language Configures the system language. ENGLISH , FRENCH
Location Changes the hospital and department
names N/A
Notch Filter Configures the ECG Notch filter. This
option is used to filter out AC line noise
from the ECG waveform. 50 Hz, 60 Hz , Off
The default is 50 Hz when the
monitor is not configured for the
US.
ECG Lead Labeling Changes the ECG lead labeling. AHA , IEC
Calibrate ECG Enables or disables the ECG verification. On, Off
Refer to "Verifying the ECG at the
TD60" on page 16 - 5 for details.
SpO
2
Module Changes the SpO
2
module. Masimo , Nellcor
* The factory default settings are in bold.