BeneVision TMS60, Руководство оператора

Страница: 225 / 250

Product Specifications Wireless Specification
TMS60 Operator’s Manual A - 9
A.6.2.2 Implemented Function
This function is provided to transfer configuration information between the TD60 and to
perform communication between a TD60 and a BP10.
BP10 transmits NIBP parameters, status, and prompt messages to the TD60. The TD60
transmits control information and settings information to the BP10.
A.6.2.3 Function Specification
Output power
≤ 2.5 mW
Data Security
Private protocol
Data integrity
Code error rate ≤ 1%
Data latency
Total delay of data transmission from BP10 to the TD60 or from
the TD60 to BP10: ≤ 3 second
Total delay of data transmission from the TD60 to the CMS: ≤ 3
second
Priority
All communication data type shall have the same priority.
Transmission distance
Distinct vision distance between the TD60sTD60s is no less than
3 m
Distinct vision distance between the TD60sTD60s and the BP10
is no less than 3 m.
System capacity
One TD60 can synchronously transport the device configuration
to at least other five the TD60sTD60s in a 10 m
2
space. Five pairs
of the TD60sTD60s and BP10s can communicate in a 10 m
2
space, with the TD60 communicating with the CMS.
Resistance to wireless interference
The bluetooth function is normal when the distance between
the following interfering devices and the TD60 or BP10 are as
follows:
■
> 1 m for microwave ovens.
■
> 0.2 m for cellular communication devices, Wi-Fi
devices, intercoms, and cordless phones.
Communication interruption message
When the bluetooth communication is interrupted, the TD60
displays a prompt message.