BeneVision TMS60, Руководство оператора

Страница: 166 / 250

Monitoring at the CMS (Version 03.00 or Above) Monitoring with the TMS60 at the CMS
12 - 48 TMS60 Operator’s Manual
12.3.5.3 Setting Arrhythmia Alarm Properties
To set arrhythmia alarm properties, follow this procedure:
1. From the Arrhythmia tab, select the Alarm section.
2. Set the desired alarm properties.
For the default alarm properties, See “Factory Default Parameter Alarm Settings” on
page 12-3.
12.3.5.4 Changing Arrhythmia Alarm Threshold Settings
You can change threshold settings for some arrhythmia alarms. When an arrhythmia vio-
lates its threshold, an alarm will be triggered. To do so, follow this procedure:
To change arrhythmia settings, follow this procedure:
1. From the Arrhythmia tab, select the Threshold section.
2. Set the desired items.
12.3.5.5 Setting PVC-Related Alarms Threshold
PVC-related alarms are detected on the basis of the current ventricular heart rate and the
number of consecutive PVCs.
To set the threshold of PVC-related alarm threshold, follow this procedure:
1. From the Arrhythmia tab, select the More Threshold section.
2. Set the desired items using the right or left arrow.
The following figure illustrates the conditions under which PVC alarms will be generated
if
V-Tach PVCs is set to 6, V-Tach Rate is set to 130, V-Brady PVCs is set to 5, and V-
Brady Rate is set to 40.