manualshive.com logo in svg

BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard, Руководство пользователя

Продукт BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard - это надежное устройство для обеспечения безопасности доступа. Пользователь может скачать бесплатный пользовательский мануал для данного продукта на manualshive.com. Поддерживается русский язык.

Поделиться
Скачать
background image

Copyright 

 1999 Lucent Technologies

585-212-011

All Rights Reserved

Comcode 108366030

Printed in U.S.A.

Issue 1

March 1999

Notice

While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Lucent
Technologies can assume no responsibility for any errors or liability for any direct or consequential damages resulting from use of the information.
Changes and/or corrections to the information contained in this document may be incorporated into future issues.

Responsibility for Your System’s Security

Toll fraud is the unauthorized use of your telecommunications system by an unauthorized party, for example, persons other than your company’s
employees, agents, subcontractors, or persons working on your company’s behalf. Note that there may be a risk of toll fraud associated with your
telecommunications system, and if toll fraud occurs, it can result in substantial additional charges for your telecommunications services.

You and your System Manager are responsible for the security of your system, such as programming and configuring your equipment to prevent
unauthorized use. The System Manager is also responsible for reading all installation, instruction, and system administration documents provided
with this product in order to fully understand the features that can introduce risk of toll fraud and the steps that can be taken to reduce that risk.
Lucent Technologies does not warrant that this product is immune from or will prevent unauthorized use of common carrier telecommunication
services or facilities accessed through or connected to it.  Lucent Technologies will not be responsible for any charges that result from such
unauthorized use.

Trademark Notice

DEFINITY and INTUITY are registered trademarks of Lucent Technologies.

Disclaimer

Intellectual property related to this product (including trademarks) and registered to AT&T Corporation has been transferred to Lucent Technologies
Incorporated.

Any references within this text to American Telephone and Telegraph Corporation or AT&T should be interpreted as references to Lucent
Technologies Incorporated. The exception is cross references to books published prior to
December 31, 1996, which retain their original AT&T titles.

Heritage Statement

Lucent Technologies —  formed as a result of AT&T’s planned restructuring —  designs, builds, and delivers a wide range of public and private
networks, communication systems and software, consumer and business telephone systems, and microelectronics components. The world-
renowned Bell Laboratories is the research and development arm for the company.

Ordering Information

You can download a copy of this Guide and the ASG Guard/ASG Guard Plus Getting Started Guide from the Lucent website at
http://www.lucentdocs.com.

Fraud Intervention

If you suspect you are being victimized by toll fraud and you need technical support or assistance, call the Lucent Technologies National Customer
Care Center at 1 800 643-2353. For international customers, contact your local Center of Excellence.

To Get Help

If you need assistance with administration and configuration of the ASG Guard, call Ion Networks, Inc. at
1 732 494-4440. Their technical support staff is available 9:00 a.m. to 5:00 p.m. EST Monday through Friday. This call may be billable. If you
believe you have a repair problem, call Lucent Technologies at 1 800 242-2121 or your local Authorized Dealer. For international customers,
contact your local Center of Excellence.

To resolve the problem as quickly as possible, describe the problem and note the steps that you have taken to resolve it. Also note the status of the
LEDs on the front panel.

Home Page

The home page for Lucent Technologies is 

http://www.lucent.com .

Содержание Lucent Technologies Access Security Gateway Guard











































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lucent Technologies Access Security Gateway Guard

Ubisys G1 Assembly And Commissioning Instructions preview
G1
Бренд: Ubisys Страницы: 51
3Com V6100 User Manual Manual preview
V6100
Бренд: 3Com Страницы: 496
3Com OfficeConnect 3CR100A97 User Manual preview
OfficeConnect 3CR100A97
Бренд: 3Com Страницы: 177
H3C Voice Gateway H3C VG 10-10 Safety Manual preview
Voice Gateway H3C VG 10-10
Бренд: H3C Страницы: 31
H3C SR6602-I AI Series Installation Manual preview
SR6602-I AI Series
Бренд: H3C Страницы: 80
H3C SR6602-I AI Series Hardware Information preview
SR6602-I AI Series
Бренд: H3C Страницы: 33
H3C SecPath M9000 Series Quick Manual preview
SecPath M9000 Series
Бренд: H3C Страницы: 4
H3C SecPath M9000 Series Installation, Quick Start preview
SecPath M9000 Series
Бренд: H3C Страницы: 15
H3C MSR3610-I Series Installation, Quick Start preview
MSR3610-I Series
Бренд: H3C Страницы: 5
H3C SecPath M9000 Series Compliance And Safety Manual preview
SecPath M9000 Series
Бренд: H3C Страницы: 57
WAGO 758-918 Manual preview
758-918
Бренд: WAGO Страницы: 76
RTA 460PBSDFM-N70PB Product User Manual preview
460PBSDFM-N70PB
Бренд: RTA Страницы: 73
ZyXEL Communications P-873HNU(B)-51B Quick Start Manual preview
P-873HNU(B)-51B
Бренд: ZyXEL Communications Страницы: 12
M2M IDG500AM-0T001 User Manual preview
IDG500AM-0T001
Бренд: M2M Страницы: 357
GE POWER LEADER GEH-6505A User Manual preview
POWER LEADER GEH-6505A
Бренд: GE Страницы: 24
GE ProBridge User Manual preview
ProBridge
Бренд: GE Страницы: 16
GE PACSystems RX3i Genius User Manual preview
PACSystems RX3i Genius
Бренд: GE Страницы: 79
Alcatel-Lucent OmniAccess 780 Specifications preview
OmniAccess 780
Бренд: Alcatel-Lucent Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды