manualshive.com logo in svg

BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard, Руководство пользователя

Продукт BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard - это надежное устройство для обеспечения безопасности доступа. Пользователь может скачать бесплатный пользовательский мануал для данного продукта на manualshive.com. Поддерживается русский язык.

Поделиться
Скачать
background image

User Connectivity

137

11.4.3 Using Variable Callback

When you use the Variable Callback authentication method, the ASG Guard/ASG Guard Plus will
call you back at whatever number you enter. This authentication method is not as secure as
Fixed Callback. To dial in to the ASG Guard/ASG Guard Plus using the Password/Callback
Variable Callback authentication method:

1.

From your terminal, or terminal emulator, type the proper modem commands followed by the
ASG Guard/ASG Guard Plus telephone number, and then press the ENTER key.

The ASG Guard/ASG Guard Plus responds by requesting that you enter your User ID. From
your User ID, the ASG Guard/ASG Guard Plus will determine that you are using the Variable
Callback method of access.

2.

At the ASG Guard/ASG Guard Plus system prompt, type your User ID and then press the
ENTER key.  The ASG Guard/ASG Guard Plus then requests that you enter your password.
Type your password at the system prompt and then press the ENTER key.

NOTE:
As you type your password, the ASG Guard/ASG Guard Plus displays asterisks (*)
for security purposes.

3.

The ASG Guard/ASG Guard Plus will then ask for the number at which to call you back. At
the system prompt, type the number the ASG Guard/ASG Guard Plus is to use to call you
back, and then press the ENTER key. The ASG Guard/ASG Guard Plus then disconnects.

The ASG Guard/ASG Guard Plus will now call you back at the number you gave it.  Make
certain that your modem is in auto-answer mode or that you are prepared to answer the call
using modem commands.

4.

After handshaking has been completed, the ASG Guard/ASG Guard Plus will again request
your password. Enter your password at the system prompt.  If your password is correct, you
will either be connected to the ASG Guard/ASG Guard Plus or to the host, depending on your
Access Class:

•

 

If you are connected to the ASG Guard/ASG Guard Plus (Sysop session), you can
perform all of the operations to which your Access Class entitles you.

•

 

If you are connected to the host port (Host Session), you will have to perform all of the
normal host login procedures.

If you entered your password incorrectly, the ASG Guard/ASG Guard Plus will give you a
second chance to enter the correct password. Retype your password and then press the
ENTER key.

You are permitted three attempts at entering your User ID and three attempts at entering your
password.  If the third response is incorrect, the connection is dropped.  If you know you
should have access, and that you entered your password correctly, contact your System
Administrator for assistance.

Содержание Lucent Technologies Access Security Gateway Guard











































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lucent Technologies Access Security Gateway Guard

Rath 2100-GSM4 Data Sheet / Manual preview
2100-GSM4
Бренд: Rath Страницы: 2
Kunbus PR100088 User Manual preview
PR100088
Бренд: Kunbus Страницы: 30
Eurogard ServiceRouter V3 Quick Start preview
ServiceRouter V3
Бренд: Eurogard Страницы: 4
D-Link DVG?6001G User Manual preview
DVG?6001G
Бренд: D-Link Страницы: 55
D-Link DVG-3104MS - VoiceCenter PSTN Gateway Specifications preview
DVG-3104MS - VoiceCenter PSTN Gateway
Бренд: D-Link Страницы: 3
D-Link DVG-5004S Quick Installation Manual preview
DVG-5004S
Бренд: D-Link Страницы: 7
D-Link DVG-6004S Quick Installation Manual preview
DVG-6004S
Бренд: D-Link Страницы: 9
D-Link DVG-5008S Quick Installation Manual preview
DVG-5008S
Бренд: D-Link Страницы: 7
D-Link DVG-7044S Quick Installation Manual preview
DVG-7044S
Бренд: D-Link Страницы: 7
D-Link DVG-7062S Quick Installation Manual preview
DVG-7062S
Бренд: D-Link Страницы: 7
D-Link DVG?6008G User Manual preview
DVG?6008G
Бренд: D-Link Страницы: 92
D-Link DVG-5008S User Manual preview
DVG-5008S
Бренд: D-Link Страницы: 56
D-Link DVG-7062S User Manual preview
DVG-7062S
Бренд: D-Link Страницы: 71
D-Link DVG-2024S User Manual preview
DVG-2024S
Бренд: D-Link Страницы: 76
D-Link DVG-3004S User Manual preview
DVG-3004S
Бренд: D-Link Страницы: 87
D-Link DVG-7044S User Manual preview
DVG-7044S
Бренд: D-Link Страницы: 71
D-Link DVG-4032S User Manual preview
DVG-4032S
Бренд: D-Link Страницы: 50
D-Link DVG-3104MS - VoiceCenter PSTN Gateway User Manual preview
DVG-3104MS - VoiceCenter PSTN Gateway
Бренд: D-Link Страницы: 162

Бренды по названию

Популярные бренды

Загрузить еще бренды