BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 266

BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard Скачать руководство пользователя страница 39

Basic Configuration

27

User Expiration
Date

Press the ENTER key to NOT have the user’s access
privileges expire at a certain date.

If the user privileges are to expire on a specific date, enter the
date in the specified month/day/year format and press the
ENTER key, which the user will no longer have access to the
ASG Guard/ASG Guard Plus. After this date, the user will be
denied access.

NOTE: If you use a two-digit year format, the years from
00 - 84 will be reported as 2000-2084.

Primary
Authentication
Method

Press the SPACE BAR until the desired choice is displayed:
ASG Key, Password/Callback, and Pager. Select the
appropriate method by pressing the ENTER key when the
desired choice appears.

NOTE: Depending on which method of authentication
you select, you will be prompted for further information
after you complete the main portion of this screen.

Password/Callback

contains three options: passthru, regular

callback and variable callback.

•

Passthru

option requires only that the user enter the

correct ID and password to access the ASG
Guard/ASG Guard Plus and the equipment it
protects.

•

Regular callback

requires the user to have a specific

phone number stored in the ASG Guard/ASG Guard
Plus database as well as a password. After the user
calls the ASG Guard/ASG Guard Plus and enters
the correct ID and password, the ASG Guard/ASG
Guard Plus will disconnect and call the user back at
the stored telephone number. The password is then
re-entered.

•

Variable callback

is similar to regular callback, except

that the user enters a telephone number during each
login. The ASG Guard/ASG Guard Plus will call the
user back at the specified telephone number, which
may be different from session to session.

«
...
37
38
39
40
41
...
»

Содержание Lucent Technologies Access Security Gateway Guard











































































































































































































































































Отзывы:

Нет отзывов