Baldor VS1SD, Инструкция по установке и эксплуатации

Страница: 145 / 192

Monitor and RTC Description 12-3 MN766
P# Type Name Unit Help
55 ACC/DEC DEMAND Hz/SEC Accel/Decel Demand. - Current ramp rate used by the velocity profi ler
56 ID CURRENT A ID Current. - D axis measured current proportional to motor fl ux
57 ID DEMAND A ID Demand. - D axis demand current proportional to motor fl ux
58 IQ CURRENT A IQ Current. - Q axis measured current proportional to motor torque
59 IQ DEMAND A IQ Demand. - Q demand current proportional to motor torque
60 POWER FACTOR Power Factor. - Ratio of (real power)/(apparent power)
61 PHASE 1 CURRENT A Phase 1(U) Current. - Phase U current
62 PHASE 2 CURRENT A Phase 2(V) Current. - Phase V current
63 PHASE 3 CURRENT A Phase 3(W) Current. - Phase W current
64 VD DEMAND V VD Demand. - D axis voltage demand for setting up motor fl ux
65 VQ DEMAND V VQ Demand. - Q axis voltage demand for setting up motor torque
66 ELECTRICAL ANGLE °
Electrical Angle. - Electrical angle used to develop phased voltages to
the motor
67 MOTOR SPEED RPM Motor Speed. - Current speed of the motor
68 AT TEST DESC Autotune Test Description. - Description of current autotuning state
69 R/W APP LAYER ERROR
Application Layer Error. Application layer error code number. The last
error that occurred
70 USB TRANSACTIONS USB Transactions. Total number of USB transactions since start up
71 USB ERRORS USB Errors. Total number of USB errors since start up
72 TSK STATUS
Task Status. Runtime task overrun status. Bits correspond to tasks that
have overrun their time limit
73 TSK ID Task ID. First task that overran its time slot
74 TSK COUNT
Task Count. Total number of overruns for the fi rst task to overrun its time
slot
75 Kp PACKETS Keypad Packets. Total number of processed keypad packets
76 Kp T-GAPS Keypad Gaps. Total number of keypad inter-packet time gap errors
77 Kp NAKs
Keypad NAKs. Total number of NAKs sent. High word are received
NAKs low word is transmitted NAKs
78 EST POWER kW
Estimated Power. - Drive power output estimated from measured current
and voltages. Units: KW
79 EST ENERGY kWH
Estimated Energy. - Delivered by drive. Estimated from measured
current and voltages. Units: kHW
80 EST COST $
Estimated Cost. - Cost of output energy delivered. Estimated from cost
of kWH unit parameter
81 R/W ACCESS KEY
Access Key. - Parameter security access key. Contact Baldor to decode
the key code
82 R/W KEYPAD SOFT VER Keypad Software Version. - Keypad software version string
Table 12-1 Monitor Parameters Descriptions Continued