Baldor VS1SD, Инструкция по установке и эксплуатации

Страница: 65 / 192

Using the Keypad 6-7 MN766
How to Change a Value
These are the BASIC screens. To change a value, simply display the desired parameter and press Enter and change the
value. For example:
Action Description Display Comments
Press to go to the
next Basic Params
screen.
1401 indicates the parameter
number and F indicates it is the
factory value.
BASIC
STATUS F1401T1 BACK
OPERATING MODE
Keypad
INPUT SETUP
Press Enter to choose
parameter value and
edit.
STATUS F1401T1 BACK
Press “F2” to exit EDIT mode
without saving changes.
Press the or keys
to change parameter
value.
END F1401T1 BACK
Press Enter to save the
parameter value and
exit.
BASIC
STATUS C1401T1 BACK
OPERATING MODE
Process Control
BASIC
BASIC
INPUT SETUP
INPUT SETUP
INPUT SETUP
Process Control
OPERATING MODE
OPERATING MODE
Keypad
When editing a parameter value, the function of the “F1” key (previous parameter block) shown in the lower left of the
display changes to one of the following to help select the parameter value: TOP Press “F1” to display and select the fi rst
value in the list of parameter values.
When the fi rst parameter value is displayed, press Enter or scroll to select a different value. END Press “F1” to display and
select the last value in the list of parameter values.
When the last parameter value is displayed, press Enter or scroll to select a different value. DEF Press “F1” to display and
select the Factory Setting value.
PREV Press “F1” to display and select previous value.
MIN Press “F1” to display and select minimum parameter value.
MAX Press “F1” to display and select maximum parameter value.
Note: When END is displayed, Pressing “F1” will display the last value in the list but then TOP or DEF is displayed. The “F1”
key allows you to quickly move through large lists of parameter choices. The value is not selected until you press
“Enter”.