Baldor VS1SD, Инструкция по установке и эксплуатации

Страница: 90 / 192

7-16 Parameter Descriptions MN766
Block Title
Parameter (Number)
Selection (Value)
Parameter Name and Description
DRIVE
CONFIG
(Continued)
LANGUAGE SELECT (2102) Preset Value: 0
Range: 0 - 1
English (0) Sets English as displayed text.
Other (1)
Sets "OTHER", (Spanish, German, Italian, French, or Portuguese) English
and one language can be stored (Spanish, German, Italian, French and
Portuguese). Standard fi rmware allows English and Spanish. For other
languages, language tables must be loaded into the drive’s language fl ash
area.
FACTORY SETTINGS (2103) Preset Value: 0
Range: 0 - 1
No (0) No Action.
Yes (1)
Restores factory settings for all parameters. (Overwrites all stored values for
all four parameter tables).
SECURITY (2105) Preset Value: 0
Range: 0 - 3
Off (0) Security not enabled.
Local (1) Security enabled for keypad only.
Network (2) Security enabled for Network only.
Total (3) Security enabled for both Keypad and Network.
Enables Security.
ACCESS TIMEOUT (2106) Preset Value: 5.0
Range: 1.0 - 600.0 seconds
If security is enabled and program mode is entered, the access code must
be correctly entered. After parameters are changed and program mode
exited this timer begins to timeout. If program mode is accessed after
timeout, the security code must be entered a second time.
ACCESS CODE (2107) Preset Value: 9999
Range: 0 - 9999
Sets security code for login required to access locked parameters.
ACTIVE PARAM TBL (0052) Preset Value: 0
Range: 0 - 3
T1 (0) Table 1 is used as active parameter set.
T2 (1) Table 2 is used as active parameter set.
T3 (2) Table 3 is used as active parameter set.
T4 (3) Table 4 is used as active parameter set.
Note: This parameter is not actually in the Level 2 Blocks. It is Parameter
0052 in the MONITOR block if using Workbench.
CLEAR FAULT LOG (2108) Preset Value: 0
Range: 0 - 1
No (0) No Action.
Yes (1) Deletes all fault log entries and trace values.
Table 7-2 Level 2 Parameter Block Defi nitions Continued