Baldor VS1SD, Инструкция по установке и эксплуатации

Страница: 175 / 192

Parameter Tables B-13 MN766
Block Title Parameter P# Adjustable Range Factory User Setting
PULSE
FOLLOWER
(Continued)
RX RATIO OUT 2 3108 1 - 1048576 1024
RX RATIO OUT 3 3109 1 - 1048576 1024
RX RATIO OUT 4 3110 1 - 1048576 1024
OUTPUT TYPE 3111 0-Quadrature
1-Speed 0
TX RATIO INPUT 3112 1 - 1048576 1024
TX RATIO OUTPUT 3113 1 - 1048576 1024
SAVE RX OUT RATIO 3114 0 - 1 0
CUSTOM
UNITS
MAX DEC PLACES 3201 0 - 5 1
VALUE AT SPEED 3202 0.0 - 9999999.0 (X.X: YRPM) 0.0: 0RPM
UNITS OF MEASURE 3203 ASCII & Graphic Characters Cust
PRESET
POSITIONS [2]
PRESET REVs 2 3301 (-49999 to 49999) : (-4095 to 4095) 1:0000
PRESET REVs 3 3302 (-49999 to 49999) : (-4095 to 4095) 2:0000
PRESET REVs 4 3303 (-49999 to 49999) : (-4095 to 4095) 3:0000
PRESET REVs 5 3304 (-49999 to 49999) : (-4095 to 4095) 4:0000
PRESET REVs 6 3305 (-49999 to 49999) : (-4095 to 4095) 5:0000
PRESET REVs 7 3306 (-49999 to 49999) : (-4095 to 4095) 6:0000
PRESET REVs 8 3307 (-49999 to 49999) : (-4095 to 4095) 7:0000
PRESET REVs 9 3308 (-49999 to 49999) : (-4095 to 4095) 8:0000
PRESET REVs 10 3309 (-49999 to 49999) : (-4095 to 4095) 9:0000
PRESET REVs 11 3310 (-49999 to 49999) : (-4095 to 4095) 10:0000
PRESET REVs 12 3311 (-49999 to 49999) : (-4095 to 4095) 11:0000
PRESET REVs 13 3312 (-49999 to 49999) : (-4095 to 4095) 12:0000
PRESET REVs 14 3313 (-49999 to 49999) : (-4095 to 4095) 13:0000
PRESET REVs 15 3314 (-49999 to 49999) : (-4095 to 4095) 14:0000
POS PROP GAIN 3329 000.0000 to 100.0000 000.1000
POS INTG GAIN 3330 000.0000 to 100.0000 000.0000
POS INTG CLAMP 3331 000.0 to 100.0% 10.0
POS DIFF GAIN 3332 000.0000 to 100.0000 0.0000
POS MAX ADJUST 3333 000.0 to 100.0% 10.0
POS FILTER 3334 0.1 to 500.0Hz 10.0
[2] The adjustable range of each Preset Position parameter is x:y where:
x= -49999 to 49999 REV
y= -4095 to 4095 counts
Note: In Mint WorkBench, each position is displayed as individual parameters.
For example, Preset POS 2 is 3301 (X) and 3315 (y). Parameters 3315 through 3328 are viewable only in Mint
WorkBench.
PLC MODE PLC CONFIG 1 3401 0 to 255.255.255.255 000.128.000.000
PLC CONFIG 2 3402 0 to 255.255.255.255 000.128.000.000
PLC CONFIG 3 3403 0 to 255.255.255.255 000.128.000.000
PLC CONFIG 4 3404 0 to 255.255.255.255 000.128.000.000
PLC CONFIG 5 3405 0 to 255.255.255.255 000.128.000.000
PLC CONFIG 6 3406 0 to 255.255.255.255 000.128.000.000
PLC CONFIG 7 3407 0 to 255.255.255.255 000.128.000.000
PLC CONFIG 8 3408 0 to 255.255.255.255 000.128.000.000
Table B-3 Parameter Block Values Level 3 (Cont.)