Baldor VS1SD, Инструкция по установке и эксплуатации

Страница: 117 / 192

Troubleshooting 9-3 MN766
Trace Displays Continued
Action Description Display Comments
Fault Trace Display Third word in the event trace is
the Voltage reference for the
Analog to Digital Converter.
STATUS T0003 BACK
ADC CURRENT REF
0.000 V
EV. LOG
FAULT TRACE
Press to view next entry.
Fault Trace Display Next is the Voltage measurement
of the Internal 24V power supply
for the Opto Inputs and Outputs.
STATUS T0003 BACK
24 V REF
0.0 V
EV. LOG
Press to view next entry.
Fault Trace Display Next is the status of the nine
Digital Input signals.
J2-8 (Enable) left most digit=1.
J2-16 (DIN#8) right most digit=0.
STATUS T0003 BACK
USER INPUTS
100000000
EV. LOG
Press to view next entry.
This is a bit display not a hex
value.
or
or
or
Fault Trace Display Next is the status of the Digital
Output signals. The below table
indicates the function of each of
the 8 bits.
STATUS T0003 BACK
DIGITAL OUTPUTS
00000000
EV. LOG
Press to view next entry.
This is a bit display not a hex
value.
or
FAULT TRACE
FAULT TRACE
FAULT TRACE
Digital Output Display
Description
Hexadecimal Binary
00 0000 0000 No Fault
01 0000 0001 Actual Speed is less than Zero Speed Band
02 0000 0010 Main SCR enable (active low)
04 0000 0100 Dynamic Brake active
08 0000 1000 Soft start (pre-charge) relay active
10 0001 0000 Relay Output 2 (J3-28, 29, 30) active
20 0010 0000 Relay Output 1 (J3-25, 26, 27) active
40 0100 0000 Digital Output 2 (J2-19, 20) active
80 1000 0000 Digital Output 1 (J2-17, 18) active