Baldor VS1SD, Инструкция по установке и эксплуатации

Страница: 172 / 192

B-10 Parameter Tables MN766
Block Title Parameter P# Adjustable Range Factory User Setting
MOTOR DATA
(Continued)
ENCODER TYPE 2410 0-Single
1-Differential Use default
setting
only
RESOLVER SPEED 2411 0 - 10 1
MOTOR POLE PAIRS 2413 1 - 100 2
CALC MOTOR MODEL 2414 0-No
1-Yes 0
REVERSE ROTATION 2415 0-Off
1-On 0
BRAKE ADJUST RESISTOR OHMS 2501 0 - 255.0Ohms CALC
RESISTOR WATTS 2502 0 - 999999Watts CALC
RESISTOR TTC 2503 20 - 3600 seconds CALC
PROCESS
CONTROL PROCESS TYPE 2601 0-None
1-Forward Acting
2-Reverse Acting 0
SETPOINT ADJ LIM 2602 0.0 - 100.0% 100.0%
PROC FEEDBACK 2603 0-None
1-Setpoint Cmd
2-Local Speed Ref
3-Analog In1
4-Analog In2
5-Network
6-Composite Ref
7-Opt1 Ana In1
8-Opt1 Ana In2
9-Opt2 Ana In1
10-Opt2 Ana In2
0
SETPOINT SOURCE 2604 0-None
1-Setpoint Cmd
2-Local Speed Ref
3-Analog In1
4-Analog In2
5-Network
6-Composite Ref
7-Opt1 Ana In1
8-Opt1 Ana In2
9-Opt2 Ana In1
10-Opt2 Ana In2
0
SETPOINT COMMAND 2605 -100.0% to +100.0% 0.0
PROC ERR TOL 2606 0.0 - 100.0% 10.0
PROC PROP GAIN 2607 0.0000 - 1000.0000 1.0000
PROC INTG GAIN 2608 0.0000 - 1000.0000 0.0000
PROC INTG CLAMP 2609 0.0 - 100.0% 100.0
PROC DIFF GAIN 2610 0.0000 - 1000.0000 0.0000
PROFILE ADJUST 2611 0-Off
1-On 0
PROFILE ADJ BAND 2612 0.0 - 200.0% 50.0
PROC SLEEP BAND 2613 0.0 - 100.0% 0.0
PROC OUT FILTER 2614 0.0 - 100.0 seconds 0.00
PROC OUT OFFSET 2615 -100.0 - 100.0% 0.0
PROC OUT GAIN 2616 0.0 - 200.0% 100.0
Table B-2 Parameter Block Values Level 2 (Cont.)