Avaya G700, Установка и обновление, Страница: 115 / 808

Tasks to install the S8300 and G700
Issue 10.2 May 2007 115
●
Obtaining Ethernet interface IP address and subnet mask on page 120
●
Completing the RFA process (Obtaining license and password file) on page 120
●
Running the Automatic Registration Tool (ART) for the INADS IP address, if necessary on
page 122
Install the S8300
●
Inserting the S8300 on page 123
●
Setting telnet parameters on page 124
●
Remastering the hard drive and installing the software on page 125
●
Accessing the S8300 on page 128
●
Creating a super-user login, if necessary, for R4.0 or higher on page 129
●
Using the Avaya Installation Wizard (IW) on page 133
●
Configuring an X330 Expansion Module (if necessary) on page 172
●
Setting rapid spanning tree on the network on page 173
Administer an S8300 primary controller
●
Assigning Node Names and IP Addresses for the LSPs on page 175
●
Administering Network Regions on page 175
●
Associating LSPs with Network Regions on page 176
●
Administering IP Interfaces on page 177
●
Identifying LSPs to the S8300 primary controller on page 178
Administer an S8400, S8500, or S8700-series primary controller
●
Assigning Node Names and IP Addresses for the C-LANs and LSPs on page 180
●
Administering Network Regions on page 181
●
Assigning LSPs to the Network Regions on page 183
●
Administering IP Interfaces on page 184
●
Identifying the Survivable Processor on the primary controller on page 188
Administer the media gateway
●
Administering the Media Gateway on page 189
Complete the installation of the S8300 (if the primary controller
●
Updating IA770 INTUITY AUDIX Messaging, if installed on page 195
●
Backing up the system on page 198
●
If using IA770, administer Communication Manager for Integrated Messaging on page 200
●
Complete the Installation Process (for an S8300 LSP) on page 200