Avaya G700 Скачать руководство пользователя страница 126 | Manualshive

Страница: 126 / 808

Avaya G700 Скачать руководство пользователя страница 126

Installing a new G700 with an S8300 using the Avaya Installation Wizard

126 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

Note:

Note:

At this point, the installation script looks for the software CD on the DVD/CD drive
connected to the USB port. If the DVD/CD drive was not attached to a USB port
when the S8300 booted, you will not see any activity on the screen. In this case,
perform the following steps:

- Press the Shut Down button on the S8300 Media Server.

- When the OK-to-remove light comes on, connect the DVD/CD-ROM drive to a USB

port and reseat the S8300 in its slot.

3. Select

Install

and press

Enter

.

The

Select Release Version

screen appears.

The Select Release Version screen

4. Select the appropriate release version (if more than one) then select

OK

and press

Enter.

The

Run AUDIX Installation

screen appears.

Run AUDIX Installation screen

5. Select

Yes

if you want to install IA770 concurrently with Communication Manager. Select

No

if you do not. Then press

Enter

.

«
...
124
125
126
127
128
...
»

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов