Avaya G700, Установка и обновление, Страница: 755 / 808

Post-upgrade tasks
Issue 10.2 May 2007 755
To re-enable alarm origination
1. Telnet to the S8300 and log on.
2. At the command prompt, type
almenable -d b -s y
,
where
-d b
sets the dialout option to both (numbers)
-s y
enables SNMP alarm origination
3. Type
almenable
(without any options) to verify alarm origination enabled status.
Backing up the system
To back up the system to compact flash media (S8300C Media Server only)
1. Plug the cable to the compact flash drive into a USB port on the S8300C.
2. Insert a 128-Mb compact flash media into the top right slot of the drive.
3. On the S8300 main menu, select Backup Now .
The system displays the Backup Now screen.
4. Select the type of data you want to back up by selecting the appropriate data set.
5. Select Local Compact Flash Card back up the data onto the compact flash card.
Optionally, select Format Compact Flash to format a new card.
Note:
Note:
The compact flash card needs to be formatted only before the first use.
6. Click Start Backup .
The system displays the results of your backup procedure on the Backup Now results
screen.
To back up the system over the customer’s LAN
1. Make sure you have the IP address of the customer’s FTP, SFTP, or SCP backup server.
2. On the S8300 main menu, select Backup Now .
The system displays the Backup Now screen.
3. Select the type of data you want to back up by selecting the appropriate data set.