Avaya G700 Скачать руководство пользователя страница 711

Страница: 711 / 808

On-site Preparation for the Upgrade

Issue 10.2 May 2007

711

The final status for your backup job is shown below.

For each backup set, the message

BACKUP SUCCESSFUL

displays, if the set was backed up successfully.

7. If the AUDIX options are available, repeat Steps 3–6 for AUDIX Announcements.

Recording configuration information

If you have not already done so, you must record the current server configuration data, which
will be re-entered after the upgrade.

To view and record the current configuration data

1. Launch the Maintenance Web Interface.

2. Under Server Configuration and Upgrades, click

Configure Server

3. Click

Continue

on the first and second screen.

4. On the

Select method for configuring server

screen, select

Configure individual

services

and click

Continue

5. Select

Set Identities

from the left-side navigation pane and record the host name of the

server.

6. Select

Configure Interfaces

and record the following:

- Server IP address

- Gateway IP address,

- Subnet mask

- Integrated Messaging IP address, if configured

You can skip the remaining configuration screens.

7. Select

Close window

and exit the Web pages.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Avaya G700, Установка и обновление, Страница: 711 / 808

Результаты поиска

Содержание G700

Отзывы: