manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 508 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 508

Manual installation of a new G700 without an S8300

508 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Note:

Note:

For an S8500 or S8700/S8710 primary controller, if you enter a combination of 
both C-LANs and LSPs, you must list C-LANs first.

2. Type 

reset mgp

 at the 

MG-???-n(configure)#

 prompt to reset the G700 media gateway 

processor. 

A system prompt asks you to confirm the reset.

3. Select 

Yes 

at the dialog box that asks if you want to continue. 

The G700 media gateway processor resets. The LEDs on the G700 media gateway and the 
media modules flash. These elements each conduct a series of self-tests. When the LEDs 
on the media modules are extinguished and the active status LEDs on the G700 media 
gateway are on, the reset is complete. 

The system ultimately returns you to the 

P330-1 (configure)

 prompt.

At the 

P330-1(configure)# 

prompt, type 

session mgp

.

At the 

MG-001-1(super)#

 prompt, type 

configure

 to change to the configuration mode.

Note:

Note:

Because the G700 media gateway has registered with its primary controller, the 
prompt name has changed; for example, to 

MG-001-1

.

Type 

show mgc

 to display the list of available servers and their IP addresses.

For example:

Show Call Controller Status Screen

The Gateway will have registered with the primary controller, if present. If the primary 
controller is running and has been administered properly, the 

Registered

 field says 

YES

 

and the 

H248 Link Status

 says 

UP

. If the controller is not running, the 

Registered

 field says 

NO

 and the 

H248 Link Status

 says 

DOWN

.

MG-001-1(configure)# show mgc

CALL CONTROLLER STATUS

------------------------------------------

Registered          : YES 

Active Controller   : 135.9.71.95 

H248 Link Status    : UP 

H248 Link Error Code: 0x0 

MGC List Management : Static 

CONFIGURED MGC HOST               DHCP SPECIFIED MGC HOST 

--------------------             ----------------------- 

135.9.71.95                      -- Not Available -- 

- Not Available --               -- Not Available -- 

- Not Available --               -- Not Available -- 

- Not Available --               -- Not Available -- 

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов