Avaya G700, Установка и обновление, Страница: 299 / 808

Post-upgrade tasks
Issue 10.2 May 2007 299
To enable scheduled maintenance
1. Type
change system-parameters maintenance
and press Enter .
2. Ensure that the Start Time and Stop Time fields' administration is the same as before the
upgrade.
To busy out trunks
1. Busy out trunks that were busied out before the upgrade (see To record all busyouts on
page 262).
To check for translation corruption
1. Type
newterm
and press Enter .
If you do not get a login prompt and see the following message:
Warning: Translation corruption detected
follow the normal escalation procedure for translation corruption before continuing the
upgrade.
To resolve alarms
1. On the Maintenance Web Interface, under Alarms click Current Alarms to examine the
alarm log.
2. If any alarms are listed, click Clear All .
3. Resolve new alarms since the upgrade through Communication Manager using the
appropriate maintenance book.
To re-enable alarm origination
1. Telnet to the S8300 and log on.
2. At the command prompt, type
almenable -d b -s y
,
where
-d b
sets the dialout option to both (numbers)
-s y
enables SNMP alarm origination
3. Type
almenable
(without any options) to verify alarm origination enabled status.
To back up the system
1. Using the Maintenance Web Interface, back up the system as you did before the upgrade
selecting Save Translations and all backup sets.