manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 271 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 271

On-site Preparation for the Upgrade

Issue 10.2 May 2007

271

 

Backup Now screen (Part Two)

4. Select the 

FTP

 for the backup method and fill in the appropriate fields with information 

provided by the customer.

5. Click 

Start Backup

 to back up the files.

Note:

Note:

The backup and restore processes use the ping service to check connectivity to 
the backup server. If a backup or restore operation fails, ensure that the ping 
service is enabled. 
i. On the Maintenance Web Interface, under 

Security

 select 

Firewall

. 

ii. In the 

Service

 column, find 

ping

. 

The checkboxes for both 

Input to Server

 and 

Output from Server

 should be 

checked.

6. To check the status of the backup:

a. Under 

Data Backup/Restore

, click 

Backup History

. 

b. Select the backup file and click 

Check Status 

to open the 

Backup History Results

 

screen.

When the backup is finished, the 

Backup History Results

 screen displays

The final status for your backup job is shown below.

 

For each backup set, the message

BACKUP SUCCESSFUL

 

displays, if the set was backed up successfully.

7. If the AUDIX options are available, repeat Steps 3–6 for AUDIX Announcements.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов