Avaya G700 Скачать руководство пользователя страница 547

Страница: 547 / 808

Before going to the customer site

Issue 10.2 May 2007

547

2. Connect to the LAN using a browser on your laptop or the customer’s PC and access

http://

www.avaya.com/support

on the Internet to copy the required Communication Manager

service pack file to the laptop.

3. At the Avaya support site, click

Downloads

4. Click on

Latest TN Circuit Pack, Media Server, and Media Gateway Firmware and

Software Updates

5. Scroll down to the

Software Update table for Media Servers running Communication

Manager

6. Click on the link for the appropriate G.A. load.

7. If you are a Business Partner, scroll to the bottom of the page and select

Download Center

to access the password protected Download Center. Otherwise, for Avaya, click on

Latest

Avaya Communication Manager x.x.x Service Pack

to access the service pack

download

The File Download window displays.

File download window

8. Click the

Save

button and browse to the directory on your laptop in which you want the file

saved.

To upgrade from release 1.2.x or 1.3.0

1. If you are upgrading from release 1.2.x or 1.3.0, on the

Document Preview/Software

Updates

page, locate the service pack file name that matches the load currently installed

on the system you are upgrading.

The file name ends with .tar.gz (

for example

, if upgrading from 1.3, the filename will be

similar to 03.1.661.5-1003.tar.gz).

2. Double-click the file name.

The system displays a

File Download

window.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Avaya G700, Установка и обновление, Страница: 547 / 808

Результаты поиска

Содержание G700

Отзывы: