Avaya G700 Скачать руководство пользователя страница 717

Страница: 717 / 808

Upgrade the S8300

Issue 10.2 May 2007

717

Verifying Software Version

Note:

Note:

Since the system is now running a new software release, you must login with the

initial craft ID and password

. (You cannot use

dadmin

at this point.)

To verify the software version:

1. Log in to the Maintenance Web Interface.

See

Logging in to the S8300 Web Interface from your laptop

on page 57.

2. Under Server, click

Software Version

3. Verify that the media server is running Release 4.0 software.

The

Report as:

string should show

R014x.00

at the beginning of the string. For example,

R014x.00.0.728.0

4. Verify that the DVD/CD-ROM drive popped open and disconnect the DVD/CD-ROM drive

from the S8300 USB port.

Copying Files to the S8300 hard drive

During reformatting of the hard drive, a new directory,

/var/home/ftp/

pub

, was created.

You must copy the remaining required files to the

pub

directory on the S8300 hard drive. This

includes, but is not limited to:

●

Post-upgrade software service pack

●

License file

●

Avaya authentication file

●

New firmware files

●

Security updates

●

IA770 service packs or RFUs

To copy files to the S8300 hard drive

1. Under

Miscellaneous

on the Maintenance Web pages, click

Download Files

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Avaya G700, Установка и обновление, Страница: 717 / 808

Результаты поиска

Содержание G700

Отзывы: