Avaya G700, Установка и обновление, Страница: 121 / 808

Before Going to the Customer Site
Issue 10.2 May 2007 121
Note:
Note:
For an upgrade, you do not normally need to install a new authentication file (with
a .pwd extension). However, if one is required, follow the same steps as with a
license file.
Downloading license and password files
The license file of the S8300 as a Local Survivable Processor must have a feature set that is
equal to or greater than that of the media server that acts as primary controller (an S8300,
S8400, S8500, S8700, S8710, or S8720 Media Server). This is necessary so that if control
passes to the LSP, it can allow the same level of call processing as that of the primary controller.
Additionally, the LSP must have a version of Communication Manager that is the same as, or
later than, that of the primary controller.
Note:
Note:
The license file requirements of the LSP should be identified in your planning
documentation.
To download the license and password files to your laptop
Tip:
Tip:
Additional documentation on creating license files can be found on the RFA web
site:
http://rfa.avaya.com .
1. Use Windows File Explorer or another file management program to create a directory on
your laptop for storing license and password files (for example, C:\licenses).
2. Access the Internet from your laptop and go to Remote Feature Activation web site,
rfa.avaya.com.
3. Use the System ID, the SAP ID of the customer, or the SAP ID of the switch order to locate
the license and password files for the customer.
4. Check that the license and password files are complete.
You might need to add the serial number of the customer's G700.
5. If the files are not complete, complete them.
6. Use the download or E-mail capabilities of the RFA web site to download the license and
password files to your laptop.